Category Archives: Bikes

custom motorcycles that toxic customs has built, custom painted , and installed custom parts

2000 Harley Davidson Deuce

This is a 2000 Harley Davidson Deuce that we broke down to the frame and powder coated it and many other parts a vibrant yellow. We added a new front wheel and rotor, new exhaust, arlen ness handlebars, and grips. All of this topped off with a full custom paint job using the same colors that we paint his wife’s autism awareness bike.

2014 BMW K1300

This is a 2014 BMW K1300 that the customer brought us because he want these hard bags installed but no one made a mounting kit for them. So, here we go again. We designed, powder coated, and installed fully removable supports which would also allow the bag to still be removable.

2010 Honda Fury

This is a 2010 Honda Fury that showed up at our shop as an accident victim. Instead on returning it to its original condition, the customer decided to spice it up. So, we repaired the dents in the fuel tank by welding studs to them and pulling them out. We plastic welded the cracks in the rear fender and primed all of the parts to prepare them for paint. We added a new set of handlebars and powder coated them gloss black. We also replaced all of the damaged parts on the foot controls. We painted the tank and fenders vivid black and laid the flames out in an electric blue to match the frame.

2007 Honda VTX1800

This is a 2007 Honda VTX1800 that we installed a batwing fairing with a 2 speaker stereo system and amplifier. We painted the fairing silver and cobalt blue to match the factory finish on the rest of the bike.

2003 Kawasaki Zx12R

This is a 2003 Kawasaki Zx12R that we designed a custom wide tire kit and installed it. We built the swingarm on our swingarm jig 12” longer than stock and wide enough to fit a 260 rear tire and then powder coated it black to match the frame. Then we plastic welded all of the necessary fairing repairs and painted the fairings and tank synergy green and topped it off with 6 coats of clear coat.

1978 Suzuki GS750

This is a 1978 Suzuki GS750 that our customer rode stock while he was in college and then after he graduated, he decided to have us customize it. We broke the bike down to the frame and welded on our custom hard tail kit. We then modified a set of old Harley split tanks, added a custom spring seat, and new rear fender, new handlebars, custom foot controls, a dual headlight setup, and we fabricated a truly one of a kind exhaust. We powder coated the frame and many other pieces matte black, we blasted the wheels back to natural finish and powder coated them clear. Then we painted the tanks and fender a beautiful metallic charcoal gray, topped with lots of clear coat.

2004 Harley Davidson fatboy

This is a 2004 fatboy that we added an awesome ABS plastic upper fairing with a 4 speaker stereo system and a set of Harley Davidson hard bags with adapter brackets. Then we painted the bags, fairing, fenders, and tank charcoal gray. We added an old school HD logo and 6 coats of high gloss clear coat.

2013 Harley Davidson Street Glide FLHX

This is a 2013 Harley Davidson Street Glide FLHX that we broke down to the frame and stretched the neck up 1.5” out 2” and added 11 degrees of rake. We also installed the topshop stretched tank kit with a new console. We added a camtech inner and outer fairing, 14” apes, topshop black death rear fender and bag kit, 2 into 1 exhaust, floor boards front and rear, danny Gray seat, 26” front wheel, arlen ness trees, and a new sweeper front fender.

2007 Harley Davidson FXSTS

This is a 2007 Harley Davidson FXSTS that we sprayed an old school scallop paint job. We sanded the parts, spayed multiple coats of primer, blocked sanded and then wet sanded. We then spayed HD vivid black and 4 coats of clear coat. Then we wet sanded the clear coat and taped off some old school scallops and sprayed them antique white. After another 6 coats of clear, we wet sanded and buffed. We also powder coated the pipes with a high heat 50% gloss black and wrapped them.  We finished this project by making some custom handle bars, powder coated them matte black, and ran the wires inside the bars.