This is a 2007 kawasaki mean streak that we installed stretched bags, custom fender, front fairing with stereo, and we designed a full true dual exhaust. We topped the custom work off with a heavy silver metal flake paint job and lots of black powder coat.
This is a 2006 Kawasaki Vulcan VN2000 that we started the rebuild in December of 2014. The bike was in good condition, it just needed some serious updating. We fabricated and power coated some mounts that would allow us to install the Harley style extended hard bags. Next we removed the rear fender, stretched it to the ground, and fabricated fillers on the side of it to hold the turn signals and hide the space between the bags and the fender. We added an awesome new 21” RC Components front wheel and tire, and installed a custom front fender to accommodate the new larger wheel. We painted and installed the 18” ape hanger handlebars and we topped all of that off with a deep cherry red pearl paint and 6 coats of clear coat.
This is a 2008 Suzuki M109 that we installed an ABS front fairing with a 4 speaker stereo system and then we sprayed the phantom black to color match the original Suzuki paint. We also added a Dobeck TFI fuel controller so we could modify the air / fuel mixtures for his after market pipes.
2010 Harley Davidson FLHR Roadglide
This is A 2010 Harley Davidson FLHR Roadglide that came to us in the fall of 2014 after being total lost in an accident. The customer was ok and decided to have us rebuild the bike. We had to break the bike all the way down to the frame to begin the reconstruction. After making sure that the frame was straight, we replaced the transmission with a new one from Harley, and then replaced the subframe, swingarm, rear shocks, bags, front fender, performance machine front wheel and rotors, and many other components. We repaired the fiberglass on the badly damaged rear fender. Then we made a new set of handlebars, and added a new vance and hines exhaust system. We straightened and powder coated the crash bar, exhaust tips, and rear fender fillers. We also rebuilt the forks with new tubes and seals, and powder coated the lowers. We topped all of that off with this awesome antique style paint job, which was painted gold and then vivid black was dusted over all over. Then we added our hand laid custom graphics and 8 coats of satin clear coat.
This is 2009 Harley Davidson Sportster XL883 that put together to build awareness for autism. We painted the fenders, covers, and tank a beautiful plum purple pearl and then added these awesome graphics to spread awareness to autism.
This is a 2000 Harley Davidson Deuce that we broke down to the frame and powder coated it and many other parts a vibrant yellow. We added a new front wheel and rotor, new exhaust, arlen ness handlebars, and grips. All of this topped off with a full custom paint job using the same colors that we paint his wife’s autism awareness bike.
This is a 2014 BMW K1300 that the customer brought us because he want these hard bags installed but no one made a mounting kit for them. So, here we go again. We designed, powder coated, and installed fully removable supports which would also allow the bag to still be removable.
This is a 2010 Honda Fury that showed up at our shop as an accident victim. Instead on returning it to its original condition, the customer decided to spice it up. So, we repaired the dents in the fuel tank by welding studs to them and pulling them out. We plastic welded the cracks in the rear fender and primed all of the parts to prepare them for paint. We added a new set of handlebars and powder coated them gloss black. We also replaced all of the damaged parts on the foot controls. We painted the tank and fenders vivid black and laid the flames out in an electric blue to match the frame.
This is a 1947 Chevy 3100 that was rescued from its grave in a field. We are using a S10 frame for this project. We broke down the frame and media blasted it. Next we outfitted it with all new front end components including control arms and springs. We rebuilt the rear differential and mounted the Chevy 283 ci V8 engine that we will be rebuilding along with a TH350 automatic transmission. We had to replace both cab corners, both floor pans, both rocker panels, both sides of the lower firewall, both kick panels, and both front body supports. We are currently blasting the rest of the body so we can mount the body to the S10 frame.
This is a 2007 Honda VTX1800 that we installed a batwing fairing with a 2 speaker stereo system and amplifier. We painted the fairing silver and cobalt blue to match the factory finish on the rest of the bike.